2007 Arctic Cat ATVs factory service and repair manual, Page 191Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 191

2Wash the cylinder in parts-cleaning solvent 3Inspect the cylinder for pitting, scoring, scuffing, and corrosionIf marks
immediately apply oil to the cylinder boreIf the bore is severely damaged or gouged, replace the cylinder 2The lobe heights
must not exceed minimum specificationsInspecting Camshaft Bearing Journal 1Inspect the bearing journal for scoring, seizure
marks, or pitting4If any measurement exceeds the limit, replace the cylinder and pistonMeasuring Camshaft Runout 1 NOTE:
If the camshaft is out of tolerance, it must 2If excessive scoring, seizure marks, or pitting is found, the cylinder head
assembly must be replacedMeasuring Camshaft to Cylinder Head Clearance be replaced 1Remove the adjuster screws and jam nuts