2007 Arctic Cat ATVs factory service and repair manual, Page 198Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 198

8Release the preload slowly; then continue to relax the spring until the wing nut is flush with the end of the threads9Firmly
then remove the sleeve 2Inspect the O-rings on the movable face for nicks, tears, or swelling 3Inspect two grease seals in
the movable face for nicks, cuts, or damage 11Remove the four pins and spacers from the carr slots in the movable face: then
remove the mov able face 4Inspect the pins and bushings for wear, flat spots, looseness, or crackingAssembling 1Place the