2007 Arctic Cat ATVs factory service and repair manual, Page 208Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 208

11Place the clutch coverclutch housing assembly into position on the crankcase; then secure with the cap screws making sure
gasket onto the crankcase9Apply grease to the outer edges of the clutch housing; then from inside the clutch cover, install
the clutch housing into the cover using rubber mallet10Install- the one-way clutch onto the clutch shoe assembly 13Place
the driven pulley assembly into position and secure with the nutTighten to specifications When installed correctly, the green