2007 Arctic Cat ATVs factory service and repair manual, Page 229Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 229

14Using the Piston Pin Puller (pln 0644-328), remove the piston pinAccount for the opposite-side circlipRemove the piston1
the rod is down inside the crankcase and the crankshaft is rotated, severe damage will result1 NOTE: If the existing rings
will not be replaced with new rings, note the location of each ring for proper installationWhen replacing with new rings,
replace as complete set onlyIf the piston rings must be removed, remove them in this sequence A CAUTION When removing the
cylinder, be sure to support the piston to prevent damage to the crankcase and pisIton 13Using an awl, remove one piston-pin