2007 Arctic Cat ATVs factory service and repair manual, Page 230Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 230

BRemove each ring by working it toward the dome of the piston while rotating it out of the groove B AT THIS POINT To service
and sound judgment B AT THIS POINT To service any one specific component, only limited disassembly of components may be necessaryNote
the AT THIS POINT information in each sub-section3Put the shift lever into the hi-range position and remove the circlip from
the hillow range shift shaft; then remove the shift lever1 NOTE: It will be necessary to lift slightly on the shift lever
to remove it from the shaft and plate The engineltransmission does not have to be removed from the frame for this procedure
Removing Left-Side Components ARecoil Starter BHiILow Shifter Assembly CSpeed Sensor Housing DCover 1Remove the cap screws