2007 Arctic Cat ATVs factory service and repair manual, Page 235Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 235

Right-Side Components 1 NOTE: For efficiency, it is preferable to remove and disassemble only those components which need
the rubber retainer and porcelain seal i NOTE: The engineltransmission does not have to be removed from the frame for this
procedure Removing Right-Side Components AOil Filter BWater Pump 1Remove the clamp securing the coolant hose to the water
pump; then remove the hose 2Using the adjustable Oil Filter Wrench (pln 0644-389), remove the oil filter3Remove the three
cap screws securing the water pump cover to the right-side cover; then remove the water pump coverAccount for the O-ring