2007 Arctic Cat ATVs factory service and repair manual, Page 239Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 239

21Remove the three Phillips-head screws securing the oil pump; then remove the oil pump1 NOTE: It may be necessary to use
the oil strainer cap; then remove the capAccount for the O-ring 1 NOTE: For efficiency, it is preferable to remove and disassemble
only those components which need to be addressed and to service only those componentsThe technician should use discretion
and sound judgment Separating Crankcase Halves 1Remove the five right-side mm cap screws (one from inside the case) securin
the crankcase halvesNote the location the different-lengthed cap screws? 23Remove the two Phillips-head cap screws securing