2007 Arctic Cat ATVs factory service and repair manual, Page 278Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 278

5Install the spacer onto the driveshaft CC258D 6Place the splined bushing onto the driveshaft making sure the oil hole of
the idle gear facing the crankcase, install the idle gear and spacer 7In turn on the driveshaft, install the #1 drive gear
and washer; then secure with the circlip 4Place the bushing onto the output shaft; then install the driven gear and washer
Place the select sliding dog gear and washer onto the driveshaft; then place thedrive gear onto the driveshaft making sure