2007 Arctic Cat ATVs factory service and repair manual, Page 286Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 286

16Install the first cap screw (threads coated with red Loctite #271) securing the sprocket and tab-washer to the camshaftTighten
cap screw 21Place the cam chain tensioner guide into position and secure with the cap screw and washer 22Remove the cap screw
from the end of the chain tensioner; then using flat-blade screwdriver, rotate the adjuster screw inside the tensioner clockwise
until the screw bottoms18Rotate the crankshaft until the first cap screw (from step 16) securing the sprocket to the camshaft