2007 Arctic Cat ATVs factory service and repair manual, Page 287Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 287

1NOTE: The adjuster shaft will be drawn into the tensioner as the adjuster screw is rotated clockwiseThe adjuster shaft tension
head and valve cover 27Place the valve cover into position24Using flat-blade screwdriver, rotate the adjuster screw inside
the tensioner counterclockwise until all tension is released; then the screw into the end of the chain tensionerrn NOTE:
At this point, the rocker arms and adjuster screws must not have pressure on them 28Install the four top side valve cover