2007 Arctic Cat ATVs factory service and repair manual, Page 294Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 294

11Remove the clamp securing the cooling duct boot to the V-belt housing; then remove the cooling duct boot from the V-belt
foot peg and footwell (see Section 8) 13Disconnect the air intake temperature sensor connector; then lift the air filter
housing off the frame and slip the air pressure sensor off the mountRemove the air filter housing 14Remove the ISC valve
connector, the TPS connector, the coolant temperature sensor connector, and the fuel injector connector Page: 294 Arctic