2007 Arctic Cat ATVs factory service and repair manual, Page 296Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 296

Make sure the ignition switch is in the OFF position and the FUEL fuse is removed from the PDM to prevent inadvertent discharge
release on the gasline nose connector; then slide the gasline hose connector off the fuel rail Cover the intake opening to
prevent hardware or dirt from entering the intake or severe engine damage could occur 25Remove the engine damper stopper
from the frame; then remove the engine damper mount and damper from the engine1 NOTE: The engine damper mount is secured
to the engine with the thermostat housing cap screwsNote the position of the bleed valve in the thermostat for assembling
purposes Whenever working on the fuel system if gasline hose is removed from any component, slowly bleed the pressure from