2007 Arctic Cat ATVs factory service and repair manual, Page 302Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 302

3Remove the three cap screws securing the water pump to the engine; then remove the water pump 5Remove the starter torque
purposes; then remove the left-side coverAccount for gasket and two alignment pins 6Remove the starter idler shaft (1) and
the starter idler gear (2); then remove the shift shaft (3)Account for two washers on the shift shaft 1NOTE: Inspect the
inside of the left-side cover for any shaft washers that may have come off with the coverMake sure they are returned to their