2007 Arctic Cat ATVs factory service and repair manual, Page 323Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 323

The spring assembly is under pressureExtreme care must be taken when relaxing the springAlways wear safety glassesUse proper
to rotate clockwise approximately turn as the spring holder clears the flats or hubThis is due to slight counterclockwise
preload on the spring 11Remove the four pins and spacers from the cam slots in the movable face; then remove the movable
face 8Release the preload slowly; then continue to relax the spring until the wing nut is flush with the end of the threads9Firmly