2007 Arctic Cat ATVs factory service and repair manual, Page 335Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 335

13Place the V-belt into position over the front shaft 8Place the clutch coverclutch housing assembly into position on the
spacer onto the shaftSecure the drive face with can screw (threads coated with red Loctite #271') the cap screw to specificationsn
A CAUTION Make sure the splines extend beyond the movable drive face plate or the clutch housing spacer may become jammed
when the cap screw is tightenedThis could result in false torque reading 10Place the driven pulley assembly into position
and secure with the nutTighten to specifications 11Slide the fixed drive face onto the shaft12Spread the faces of the driven