2007 Arctic Cat ATVs factory service and repair manual, Page 336Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 336

15Rotate the V-belt and driveldriven assemblies until the V-belt is flush with the top of the driven pulley16Install the
with the cap screws making sure the different-lengthed cap screws are in their proper locationTighten the cap screws to specifications
1 NOTE: The sharp side of the circlip should be facing outward Installing Left-Side Components 1Install the oil pump securing
it to the crankcase with three Phillips-head cap screws (threads coated with red Loctite #271)Tighten securely 3Apply red