2007 Arctic Cat ATVs factory service and repair manual, Page 369Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 369

Specifications I Ignition Timing Spark Plug Type 1 NIA NGKE 0.7-0.8 mm (0.028-0.032 in 8000-12,000 ohms (primary) Less than
volts (yellow to white) 60 AC volts 5000 RPM (black to black) Crankshaft Position Sensor Peak Voltage Stator Coil Output
Peak Voltage Output (trigger) (source) (no load) Battery For battery related information, see Section 2 Ignition Timing 10'
BTDC 1500 RPM 1 spark Plug Type 1 spark Plug Gap Ignition Coil Resistance 1 NGK CR6E 0.7-0.8 mm (0.028-0.032 in 8000-12,000
ohms (500) 4000 ohms (650Less than ohm (terminal to ground) (secondary) 5200-7800 ohms (high tensionplug cap removedto ground)
(primary) (primary CDI) 140.0-215.0 DC volts500 142.4-213.6 DC volts650 (terminal to qround) RPM Limiter 1NOTE: The ATV is
equipped with CDI unit that retards ignition timing when maximum RPM is approachedWhen the RPM limiter is activated, it could
be misinterpreted as high-speed misfire Ignition Coil Peak Voltage Magneto Coil Resistance (trigger) (source) (charging)
160-240 ohms (green to blue) Less than ohm (yellow to white) Less than ohm (black to black) Testing Electrical Components