2007 Arctic Cat ATVs factory service and repair manual, Page 372Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 372

Coolant Temperature and Cooling Fan Switches (5001650 ) Cooling Fan Switch and Engine Coolant Temperature (ECT) Sensor 1Connect
less than 1.0 ohm4On the cooling fan switch, allow the water to cool and when the temperature reaches approximately 87' (189'
the meter should read an open circuitThermometer Container 5On the ECT sensor when the temperature reaches 20' (68' F), the
meter should read approximately 2.45k ohms6On the ECT sensor when the temperautre reaches 50' (122' F), the meter should
read approximately 800 ohms7On the ECT sensor when the temperautre reaches 80' (176' F), the meter should read approximately
18 ohms8On the ECT sensor when the temperautre reaches 110' (230' F), the meter should read approximately 142 ohms9If the
readings are not as indicated, the switchsensor must be replaced10Install the switchsensor and tighten securely11Connect
the leads 3On the coolant temperature switch when the water temperature reaches 112- 118' (234-244' F), the meter should
read closed circuit4On the coolant temperature switch, allow the water to cool, and when the temperature is within temperature