2007 Arctic Cat ATVs factory service and repair manual, Page 398Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 398

7Remove the two brake calipersAccount for the four cap screws and four 0.76 mm (0.030 in spacer washers 11Pull the steering
or hang, damage to the inner CV joint may occur 9Remove the tie rod lock nuts 13Remove the lower shock boltsAccount for the
lock nuts; then move the shocks aside and secure them with strap 10Remove the upper ball joint cap screws taking care not
to strip the threads on the ball joint shaft; then using rubber mallet, tap the end of the axle and free it from the knuckle