2007 Arctic Cat ATVs factory service and repair manual, Page 405Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 405

ACover Sideadd value on the gear case housing to value (all models except 400 TRV) or value (400 TRV) on the gear case cover;
to all oil seal lips5Prior to final assembling, prelubricate journal on pinion assembly with SAE 80W-90 hypoid gear lubricant
prior to pressing assembly into gear case housingAssembling Pinion Gear 3Install the pinion gear assembly into the housingUsing
the 48 mm Internal Hex Socket (pln 0444-104), secure the pinion gear assembly with the existing lock collarTighten to specifications1
NOTE: On front differential, the lock collar has right-hand threadsOn rear gear case, the lock collar has left-hand threads
1Install the bearing onto the pinion shaftInstall the pinion shaft collar 4Place punch on the edge of the lock collar in