2007 Arctic Cat ATVs factory service and repair manual, Page 409Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 409

2Using press, remove the bearing 5Repeat steps 1-4 for the opposite sideINSTALLING DIFFERENTIAL 1Align the splined input
the new bearing into the housing 1NOTE: Prior to installing the seal, apply grease to the seal outside diameter 4Install
the seal into the housing pressing evenly on the outside edge until the seal is seated l 2Pour 275 ml (9.3 oz) of SAE 80W-90
hypoid lubricant into the differential and install the filler plugTighten to specifications3Install the front drive actuator