2007 Arctic Cat ATVs factory service and repair manual, Page 412Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 412

DISASSEMBLING AXLES 1Using side-cutters (or suitable substitute), remove the large clamp from the boot 5Inspect the splines
the shaft 3Using snap ring pliers, remove the circlip securing the bearing ring to the shaftNote the direction of the bearing
for assembling purposes 1 NOTE: At this point if the outside boot damaged, continue with step 7 7Using side-cutters (or suitable
substitute), remove both outside boot clamps from the shaftNote the position of the different-sized clamps for assembling