2007 Arctic Cat ATVs factory service and repair manual, Page 420Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 420

2Place bushings and sleeves (where appropriate) into shock eyelet; then install shock with two cap screws and nutsTighten
remove the tie rod end from the knuckle Front A-Arms REMOVING 1Secure the ATV on support stand to elevate the front wheels;
then remove the wheels Make sure the ATV is solidly supported on the support stand to avoid injury 2Remove the cotter pin
from the nutDiscard the cotter pin 7Remove the cap screws securing the ball joints to the knuckle Support the knuckle when
removing the cap lor damage to the threads will occur 3Remove the nut securing the hub4Remove the brake caliperAccount for