2007 Arctic Cat ATVs factory service and repair manual, Page 440Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 440

7Remove the torx-head cap screws and nylon ties securing the left-side and right-side splash panels; then remove the panels
the wires to the front accessory plug 11Rotate the handlebar to the full-left position; then lift and slide the panel to
the rear and lift the rear up to clear the handlebar9Remove the shift knob retaining pin and remove the shift knob; then
remove the shift lever pivot axle nut and remove the axle and shift leverAccount for spring and two O-rings Page: 440 Arctic