2007 Arctic Cat ATVs factory service and repair manual, Page 443Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 443

2Remove the cap screws securing the foot pegs to the footrests; then remove the foot pegs and footwells Belly Panel 1Remove
solvent 2Inspect the footrest weldments for cracks or unusual bends3Inspect all tubing for cracks or unusual bendsINSTALLING
1Secure the footrests to the frame with four cap screws and two flanse nuts: then tighten securely2Place the footwells onto
the footrests; then put the foot pegs in position and secure with two cap screws 2Slide the muffler rearward to clear the
mounting lugs and remove the mufflerINSPECTING MUFFLER 1NOTE: Whenever part is worn excessively, cracked, or damaged in any
way, replacement is necessary 1Inspect muffler externally for cracks, holes, and dents 2Inspect the muffler internally by
shaking the muffler back and forth and listening for rattles or loose debris inside the muffler1 NOTE: For additional details