2007 Arctic Cat ATVs factory service and repair manual, Page 444Get this manual

INSTALLING MUFFLER 1Place the muffler into position engaging the mountin lugs into the grommets; then slide the muffler orward?
the gas tank cap1If the front body panel has not been removed, the left-side and right-side panels and the two machine screws
must be removed (see Front Body Panellside Panels in this section) CLEANING AND INSPECTING l NOTE: Whenever part is worn
excessively, cracked, or damaged in any way, replacement is necessary 1Clean all rear body panel components with parts-cleaning
solvent and soap and water 2Inspect side panels and rear body panel for cracks and loose rivets3Remove two machine screws