2007 Arctic Cat ATVs factory service and repair manual, Page 452Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 452

INSTALLING 2Rotate the adjuster sleeve until 0.5-1.0 mm (0.02-0.04 in is attained 1Place the return spring into the throttle
the adjustment by tightening the jam nut; then slide the boot over the jam nut 2Using pair of needle-nose pliers, place the
spring into position on the actuator arm hrottle-' Control .3Place the two halves of the throttle control onto the handlebars