2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 7Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 7

Preparation For Storage ! CAUTION Prior to storing the ATV, it must be properly serviced to prevent rusting and component
Storage Preserver, rapidly inject the preserver into the air filter opening for period of 10 to 20 seconds; then stop the
engineInstall the air filter and housing cover ! CAUTION Avoid storing outside in direct sunlight and avoid using plastic
cover as moisture will collect on the ATV causing rusting Preparation After Storage Taking the ATV out of storage and correctly
preparing it will assure many miles and hours of troublefree ridingArctic Cat recommends the following procedure to prepare
the ATV1Clean the ATV thoroughly2Clean the engineRemove the cloth from the exhaust system3Check all control wires and cables
for signs of wear or frayingReplace if necessary4Change the engine oil and filter5Check the coolant level and add properly
mixed coolant as necessary6Charge the battery; then installConnect the battery cables ! CAUTION If the interior of the air
filter housing is dirty, clean the area before starting the engine 4Drain the carburetor float chamber5Plug the exhaust hole