2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 20Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 20

Ignition Timing The ignition timing cannot be adjusted; however, verifying ignition timing can aid in troubleshooting other
HeadlightTaillightBrakelight Each time the ATV is used, lights should be checked for proper functionTurn the ignition switch
to the LIGHTS position; the headlights and taillight should illuminateTest the brakelight by compressing the brake leverThe
brakelight should illuminateHEADLIGHT NOTE: The bulb portion of the headlight is fragileHANDLE WITH CAREWhen replacing the
headlight bulb, do not touch the glass portion of the bulbIf the glass is touched, it must be cleaned with dry cloth before
installingSkin oil residue on the bulb will shorten the life of the bulb To replace the taillight-brakelight bulb, use the
following procedure1Remove the two screws and remove the lens cover2Push the bulb in and turn it counterclockwise3Install
the new bulb by turning it clockwise while pushing in4Install the lens cover ! CAUTION Tighten the lens cover screws only
until they are snug Switches Each time the ATV is used, switches should be checked for proper operationUse the following