2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 23Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 23

CHECKINGREPLACING FRONT PADS The clearance between the brake pads and brake discs is adjusted automatically as the brake
new brake pads; then install the two brake pad alignment pins 4To replace the brake pads, use the following procedureAWith
the wheel removed, remove the brake pad alignment pins from the caliper; then remove the mounting cap screws DSpread the
brake pads and place the brake caliper over the discSecure with the mounting cap screwsTighten the cap screws to specifications;
then tighten the alignment pins to specifications 5Install the wheelTighten to specificationsKM266A 6Burnish the brake pads