2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 24Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 24

AuxiliaryRear Hydraulic Brake CHECKING 1With the engine off, the transmission in neutral, and the reverse lever in the forward
should be replaced as set To bleed the auxiliary brake, see Hydraulic Brake SystemsCHECKINGBLEEDING in this sectionMEASURINGREPLACING
REAR BRAKE PADS (Utility Model) Removing 1Support the ATV on suitable support stand2Remove the left rear wheel3Remove the
two brake pad alignment pins (A); then remove the mounting cap screws (B) Installing 1Install new brake pads; then install
the two brake pad alignment pins2Spread the brake pads and place the brake caliper over the disc; then secure with the mounting
cap screws (B)Tighten the cap screws to specifications; then tighten the alignment pins (A) to specifications 4Remove the