2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 43Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 43

ATransmission (Utility Model) 1Drain the transmission lubricant into suitable container; then install the drain plug and
components are removed, install the centrifugal clutch housing on the driveshaftIf the left-side components have not been
removed, see Removing Left-Side Components in this sectionRemove only the V-belt coverKM646A 3Remove the three cap screws
securing the secondary drive bevel gear cover; then remove the coverAccount for gasket 6Remove the eight cap screws securing
the transmission case cover to the transmission case; then remove the coverAccount for gasket (A), the secondary drive bevel
gear, washer (B), and two alignment pins (C) 4Remove the speedometer gear retainer nut, washer, and speedometer gear Back