2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 47Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 47

18Remove the two cap screws securing the oil pump to the crankcase and remove the oil pump Center Crankcase Components NOTE:
Crankcase Halves 16Remove the two cap screws securing the oil baffle to the crankcase and remove the baffle; then remove
the circlip securing the oil pump driven sprocket 1Remove the left-side and right-side cap screws securing the crankcase
halves noting the position of the different-sized cap screws for joining purposes KM720A KM428 2Using Crankcase SeparatorCrankshaft
Remover (pn 0444-009) and tapping lightly with rubber mallet, separate the crankcase halvesAccount for two alignment pins