2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 56Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 56

3Apply low-temperature grease to the spring and hub4Thread the end of the rope through the guide hole of the case; then thread
down in place on the ratchet pins and secure with the cap screw coated with blue Loctite #243Tighten securelyKM405 5Align
the inner hook of the spiral spring with the notch in the reel spacer 9With the 50 cm (20 in of rope exposed, hook the rope
in the notch of the reelKM401 6Install the ratchets making sure the ends are properly oriented on the reel 10Rotate the reel