2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 57Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 57

NOTE: Increasing the rotations in step 10 will increase spring tension 2Inspect the face surfaces of the fixed and movable
or bearing seals are loose, the bearings must be replacedKM394A 3Inspect the drive pulley collar for wear or damageMeasure
the outside diameter of the drive pulley collar sliding surfaceThe minimum service limit is 26.94 mm (1.06 in 2Inspect the
V-belt cover for cracks, distortion, and loose alignment pinsNOTE: If the V-belt cover is cracked or distorted or if the