2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 60Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 60

3Install the pins and spacers into the fixed face hub; then pack the cam slots in the movable face with multi-purpose grease
the spacer is on the base or damage to the fixed face will occur when the spring is compressed 5Place the spring holder on
the spring; then install the spring on the pulley assembly 2Apply multi-purpose grease to the O-rings and grease seals on
the movable face; then install on the fixed face making sure the alignment marks are properly aligned 6Place the centrifugal