2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 75Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 75

3Slide the enginetransmission rearward into the rear engine mounts; then install the rear through-bolts and nutsDo not tighten
10Connect the engine ground wire to the engine; then connect the starter positive cable to the starter using the existing
hardwareTighten securely 5Install the front engine through-bolt; then tighten the frame brackets to specifications 6Tighten
the nuts on the two rear and one front through-bolt7Connect the shift linkage using the existing hardware8Install the output