2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 98Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 98

1Set the meter selector to the DC Voltage position2Connect the red tester lead to the brownblack wire; then connect the black
If the meter shows no voltage, inspect fuses, wiring harness, connectors, and switches VOLTAGE (Brakelight) NOTE: Perform
this test on the main harness side of the connectorAlso, the ignition switch should be in the ON position and the brake (either
foot pedal or hand lever) must be applied Ignition Timing The ignition timing cannot be adjusted; however, verifying ignition