2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 108Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 108

NOTE: Apply liberal amount of grease to the driveshaft splines and the driveshaft springThis will aid in keeping the spring
to specifications 4Insert the driveshaft assembly into the swing arm tube; then engage the driveshaft splines with the pinion
shaft splines in the rear drive gear case 5Pack approximately 3g (0.1 oz) of grease into each swing arm pivot bearing cavity;
then apply grease to the lips of the dust seals 9Install the shock absorber using the existing hardware and tighten to specifications;
then install the brakeline hose clamp on the swing arm and tighten securely 6Align the swing arm assembly in the frame and