2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 112Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 112

INSTALLING 1Install each shock absorber to the frame and A-arm with cap screws and nutsTighten all nuts to specifications
support stand to avoid injuryKM554 2Remove the rear shield plate from the swing arm; then remove the lower shock mounting
nut and cap screw CLEANING AND INSPECTING 1Clean the shock absorber in parts-cleaning solvent2Inspect the shock absorber
body, bottom stop, and rubber bushing for damage and leaking oilIf any defects are found, replace the shock absorber3Inspect
the spring, spring seat, and preload adjustment nuts and threads for damage or corrosionIf corrosion is present on the threads,