2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 114Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 114

2To inspect the swing arm and swing arm axle, place the swing arm axle and bushings in the swing arm; then using the flange
arm; then remove two bushings and the swing arm axle 4Inspect the needle bearings for missing rollers, rust or corrosion,
or flat rollersCheck for tight fit in bossReplace the arm if bearings are loose 5Inspect all dust seals and replace if they
are cracked, torn, dried out, or loose 10Remove the lock nut and cap screw securing the cushion link to the cushion armAccount
for bushingCLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is