2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 115Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 115

3Using an appropriate seal driver, install the new dust seals in the cushion arm; then apply multi-purpose grease to the
dust seals and lubricate the lips with grease6Place the swing arm into position in the frame; then install the swing arm
pivot cap screw and lock nutTighten to specifications ATV2185 ASSEMBLING AND INSTALLING 1Remove any nicks or burrs from the
bearing bosses in the cushion arm with fine emory cloth; then using suitable bearing installer, press new needle bearings
into the end bosses of the cushion arm 7Apply grease to the swing arm pivot through the grease fitting 2If the bushing was