2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 118Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 118

NOTE: The pivots are equipped with roller bearingsThe bearing rollers may fall out when the spacers are removed 5Check the
then tighten the nuts to specifications ATV2196A 2Coat the spacers and the lips of the dust seals with multi-purpose grease;
then install them in the upper pivot3Repeat steps and for the lower A-arm4Clean all grease from the ball joint tapers and
the knuckle bores; then install the arms to the steering knuckle and tighten the ball joint nuts to specificationsInstall
new cotter pins 6Install the front bumper assembly; then install the front shock absorbersApply red Loctite #271 on the cap