2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 123Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 123

CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
the handlebar for cracks, wear, or unusual bends8Inspect the handlebar grips for damage or wear9Inspect the lower steering
post support bearing and seal for wear or cracksINSTALLING 3Install the slotted nut on the lower steering post and tighten
to specifications; then install new cotter pin 1Apply thin coat of grease to the lips of the lower steering post seals; then
lower the steering post into position in the lower steering post bearingsKM591 4Place the inner tie rod ends into the steering
post arm and tighten the slotted nuts to specifications; then install new cotter pins 2Apply thin coat of grease to the upper