2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 126Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 126

2Disconnect the negative battery cable first; then the positive cable3Remove the battery hold-down strap; then remove the
mud guards NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary 1Clean all body
components with soap and water2Inspect the body and fenders for cracks3Inspect threaded areas of all mounting studs for stripping4Inspect
for missing decalsINSTALLING (DVX Model) 1Fit the body over the handlebar and rotate into normal mounting position2Using
the existing hardware, secure the front fenders to the fender supports; then connect the headlight3Using the existing hardware,
secure the rear fenders to the forward fender supports; then secure the rear fender to the frame with four cap screws and