2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 12Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 12

(Feeler Gauge Procedure) ValveTappet Clearance 4Install the spark plug; then install the timing inspection plug5Place the
the timing inspection plug; then remove the tappet covers (for more detailed information, see SectionServicing Top-Side Components)2Rotate
the crankshaft to the TDC position on the compression strokeNOTE: At this point, the rocker arms and adjuster screws must
not have pressure on themNOTE: Use Valve Clearance 0444-078) for this procedureAdjuster (pn 3Using feeler gauge, check each
valvetappet clearanceIf clearance is not within specifications, loosen the jam nut and rotate the tappet adjuster screw until
the clearance is within specificationsTighten each jam nut securely after completing the adjustment ! CAUTION The feeler
gauge must be positioned at the same angle as the valve and valve adjuster for an accurate measurement of clearanceFailure
to measure the valve clearance accurately could cause valve component damageVALVETAPPET CLEARANCE Intake Exhaust 0.1016 mm