2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 15Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 15

NOTE: To access the idle adjustment screw, it will be necessary to remove the seats and center consoleThe idle adjustment
oil to new filter O-ring and check to make sure it is positioned correctly; then install the new oil filterTighten securely6Install
the engine drain plug and tighten to specificationsPour the specified amount of the recommended oil in the filler holeInstall
the oil level stickfiller plug Change the engine oil and oil filter at the scheduled intervalsThe engine should always be
warm when the oil is changed so the oil will drain easily and completelyNOTE: To change oil and filter, the seats and center
console must be removed ! CAUTION Any oil used in place of the recommended oil could cause serious engine damageDo not use
oils which contain graphite or molybdenum additivesThese oils can adversely affect clutch operationAlso, not recommended
are racing, vegetable, non-detergent, and castor-based oils 1Park the vehicle on level ground2Remove the oil level stickfiller