2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 20Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 20

1With the master cylinder in level position, check the fluid level in the reservoirIf the level in the reservoir is not above
screw, and direct the other end into container; then while holding slight pressure on the brake pedal, open the bleeder screw
and watch for air bubblesClose the bleeder screw before releasing the brake pedalRepeat this procedure until no air bubbles
are present FrameWelds The frame and welds should be checked periodically for damage, bends, cracks, deterioration, broken
components, and missing componentsIf replacement or repair constitutes removal, see Section 8 Electrical Connections The
electrical connections should be checked periodically for proper functionIn case of an electrical failure, check fuses, connections
(for tightness, corrosion, damage), andor bulbsIf an electrical component needs to be tested for proper function, see Section