2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 21Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 21

NOTE: During the bleeding procedure, watch the reservoir very closely to make sure there is always sufficient amount of
system that all hose connections are tight, the bleed screws are tight, the protective caps are installed, and no leakage
is present ! CAUTION This hydraulic brake system is designed to use DOT brake fluid onlyIf brake fluid must be added, care
must be taken as brake fluid is very corrosive to painted surfacesPR237 INSPECTING HOSES CInstall the new brake padsDSecure
the caliper holder to the knuckle with the cap screwsTighten to specifications (see Section 10) Carefully inspect the hydraulic
brake hoses for cracks or other damageIf found, the brake hoses must be replacedCHECKINGREPLACING PADS The clearance between
the brake pads and brake discs is adjusted automatically as the brake pads wearThe only maintenance that is required is replacement
of the brake pads when they show excessive wearCheck the thickness of each of the brake pads as follows1Remove front wheel2Measure