2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 40Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 40

5Remove the fixed drive face6Using an impact driver, remove the cap screws securing the air intake plate; then remove the
Pump Driven Gear BOil Pump Drive Gear CClutch Shoe Assembly DOne-Way Clutch (Green Dot MUST Show) EFinal Drive Carrier Bearing
Housing CC829B 8Remove the one-way clutch (D) from the clutch housingNote the location of the green dot (or the word OUTSIDE)
for installing purposes9Using hydraulic press, remove the clutch housing assembly from the clutch coverAccount for the left